Robot Coupe Food Processor Buying Guide: R Series vs CL Machines

6 min read

Robot Coupe R502 V.V. food processor with stainless steel cutter bowl and vegetable slicer attachment

The right Robot Coupe food processor is an R series cutter/vegetable slicer if you chop, mix and slice in one kitchen, or a CL vegetable preparation machine if you mostly slice, grate and dice in bulk. After that, pick by meals per service, power supply and the cuts you need.

Our Robot Coupe range covers the R series food processors, CL vegetable preparation machines, kitchen blenders and stick blenders. Below we compare the models most cafes, restaurants and institutional kitchens look at, then explain how to choose. To compare other makes, see all our commercial food processors.

Model Type Bowl or hopper Power Speed (rpm) Phase Size W x D x H (mm) Meals per service
R402 V.V. Cutter/veg slicer 4.5L bowl 1000W 300 to 3500 (cutter) Single 320 x 305 x 590 20 to 100
R402 Cutter/veg slicer 4.5L bowl 750W 500/1500 Single 320 x 305 x 590 20 to 100
R502 V.V. Cutter/veg slicer 5.9L bowl 1500W 300 to 3500 (cutter) Single 380 x 365 x 670 30 to 300
R502 Cutter/veg slicer 5.9L bowl 900 W 750/1500 Three 380 x 365 x 670 30 to 300
R752 V.V. Cutter/veg slicer 7.5L bowl 1500 W 300 to 3500 (cutter) Single 380 x 365 x 710 50 to 400
R752 Cutter/veg slicer 7.5L bowl 1800 W 750/1500 Three 380 x 365 x 710 50 to 400
CL50 Prep Ready Veg prep machine 2.2L hopper 550 W 375 Single 380 x 305 x 595 50 to 400
CL50 Gourmet Veg prep machine 2.1L hopper 550 W 375 Single 390 x 340 x 610 20 to 300

R series or CL series: which type do you need?

The R series are cutter/vegetable slicers. One motor base takes a cutter bowl and a vegetable slicing attachment. The CL machines are dedicated vegetable preparation machines with lateral ejection, so cut produce drops straight into a tub or pan.

  • Choose an R series if you need a cutter to chop, emulsify, knead, grind and prepare sauces, as well as slice and grate vegetables. It suits cafes and restaurants with mixed prep.
  • Choose a CL machine if most of your prep is slicing, ripple cutting, grating, dicing, julienne and French fries in large amounts. It has no cutter bowl.
  • Many busy kitchens run both: an R series for sauces and pastes, and a CL for salad and vegetable prep.

Size it by meals per service

Robot Coupe rates each machine by the meals or covers it suits per service. This is the easiest way to narrow the list.

  • R402 and R402 V.V.: 20 to 100 meals, with a 4.5L bowl.
  • R502 and R502 V.V.: 30 to 300 meals, with a 5.9L bowl.
  • R752 and R752 V.V.: 50 to 400 meals, with a 7.5L bowl.
  • CL50 Gourmet: 20 to 300 meals. CL50 Prep Ready: 50 to 400 meals.
  • CL55 2 Heads: 100 to 1000 covers per service.
  • CL60 2 Heads and CL60 Pusher Head: up to 3000 covers per service.

If you sit between two sizes, go up. A bigger bowl means fewer batches on a busy day.

Single phase or three phase power

Check your power before you choose. The V.V. models are single phase, and the R752 V.V. lists 5.8 amps. The R402 V.V. lists 10 amps. The plain R502 and R752 are three phase, as are the CL60 machines. The CL55 2 Heads comes in a single phase and a three phase version. The CL50 machines are single phase with a 10A plug.

  • No three phase outlet? Stick to the V.V. models, the R402, the CL50 range or the single phase CL55.
  • Have three phase on site? The R752 gives you 1800 W, and the R502 has 900 W.
  • Ask an electrician to confirm your circuit before ordering a three phase unit.

Variable speed or fixed speeds

V.V. stands for variable speed. The R402 V.V., R502 V.V. and R752 V.V. run from 300 to 1000 rpm in vegetable preparation and 300 to 3500 rpm in cutter mode. That gives you finer control over coarse chops, smooth pastes and delicate fruit.

The fixed speed models are simpler. The R502 and R752 run at 750/1500 rpm, and the R402 at 500/1500 rpm. The CL50 has one speed of 375 rpm. The CL55 and CL60 offer 375 rpm and 750 rpm.

Discs and cuts included

The cut range you get out of the box varies a lot between models.

  • The R402 and R402 V.V. come with 4 stainless steel discs: 2 and 4 mm slicers, a 2 mm grater and a 4x4 mm julienne.
  • The R502 and R752 models have no disc included, with more than 50 discs as options.
  • The CL50 Prep Ready comes with 4 Mineral+ discs: 2mm and 4mm slicers, a 2mm grater and a 4x4mm julienne.
  • The CL50 Ultra Pizza comes with 3 discs: 2mm and 4mm slicers and a 7mm grater, set up for toppings and cheese.
  • The CL55 Workstation and CL60 Workstation come with a MultiCut Pack of 16 discs plus a trolley.

If you buy a model without discs, list the cuts on your menu first, then add only the discs you will use. Replacement items sit in our spare parts range.

Footprint and weight

R series machines are benchtop units. The R402 V.V. measures 320 x 305 x 590 mm and weighs 22kg. The R502 V.V. weighs 30kg. Allow room above for the lid and pusher.

The larger CL machines stand on the floor. The CL55 2 Heads weighs 42kg and the CL60 2 Heads weighs 69kg. The CL60 has 2 wheels and a handle so you can move it for cleaning.

Frequently asked questions

What is the difference between the R502 and the R502 V.V.? Both have a 5.9L bowl and suit 30 to 300 meals. The R502 is three phase, with 900 W and speeds of 750/1500 rpm. The R502 V.V. is single phase, with 1500W and variable speed.

Do Robot Coupe food processors come with discs? Some do. The R402 models and the CL50 Prep Ready include 4 discs, while the R502, R752 and most CL machines have no discs included, so you add the ones you need.

Can a Robot Coupe food processor blend soups? The cutter bowl can emulsify and prepare sauces, but for smooth liquids a kitchen blender is the better tool. The BL 5 has a 5 litre bowl and variable speed from 500 to 12,600 rpm. For blending in the pot, see our immersion blenders or wider commercial blenders.

How much can a CL machine process per hour? Robot Coupe lists the CL50 Prep Ready at up to 500 kg/hr, the CL55 2 Heads at up to 1200 kg/hr and the CL60 2 Heads at up to 1800 kg/hr.

Where are Robot Coupe machines made? The R series and CL machines in this guide are listed as made in France.

Sources: all figures are each maker's own, taken from our product pages.

Share this article

Shop this article

Genuine brands, full Australian warranties and fast nationwide delivery.

More from the blog